§ 50.5. National secondary ambient air quality standard for sulfur oxides (sulfur dioxide).
218 words·~1 min read·
/us/cfr/t40/s§ 50.5·A research copy — for the controlling text, always check the official state or federal source. Not legal advice.
(a)The level of the 3-hour standard is 0.5 parts per million (ppm), not to be exceeded more than once per calendar year. The 3-hour averages shall be determined from successive nonoverlapping 3-hour blocks starting at midnight each calendar day and shall be rounded to 1 decimal place (fractional parts equal to or greater than 0.05 ppm shall be rounded up).
(b)Sulfur oxides shall be measured in the ambient air as sulfur dioxide by the reference method described in appendix A of this part or by an equivalent method designated in accordance with part 53 of this chapter.
(c)To demonstrate attainment, the second-highest 3-hour average must be based upon hourly data that are at least 75 percent complete in each calendar quarter. A 3-hour block average shall be considered valid only if all three hourly averages for the 3-hour period are available. If only one or two hourly averages are available, but the 3-hour average would exceed the level of the standard when zeros are substituted for the missing values, subject to the rounding rule of paragraph
(a)of this section, then this shall be considered a valid 3-hour average. In all cases, the 3-hour block average shall be computed as the sum of the hourly averages divided by 3. [61 FR 25580, May 22, 1996]
Connections7 cite this
Citation graph
cites case law
§ 50.5
National secondary ambient air quality standard for sulfur oxides (sulfur dioxide).
Fed. Reg.×7
Cites 0Cited by 7 across 1 source